The Ghost Immobiliser
Immobilisers are an effective tool in the fight against vehicle theft. They stop the vehicle from starting if it doesn't have a key fob. They also help to stop hotwiring or other traditional forms of vehicle theft. Newer methods such as key cloning and relay theft are becoming increasingly common.
The Ghost Immobiliser is designed to counter these new trends and make your car undetectable. It is quiet and discreet and does not use radio signals, key fobs or LED indicators.
Easy to install
The Ghost Immobiliser is a groundbreaking device, connects with the CAN data network of your vehicle to stop key cloning and theft. It is a TASSA approved product, and insurance companies endorse it. It is silent and virtually undetectable to thieves. It uses buttons in your steering wheel, the centre console and doors to create an unique pin code sequence that has to be entered before you are able to start your car. You can create up to 20 different sequences to provide greater security. It's easy to install and doesn't require additional hardware.
To get the most effective outcomes it is recommended you choose a reputable CAN-immobiliser installer who is skilled in your specific vehicle. Ideally, they'll have a workshop in your area where you can go to have your installation completed. You can also find various tools and materials that can assist you in the installation. They will have basic hand tools, multimeters insulation tape, and heat shrink tubing to protect the connections. A user's manual will give instructions specific to the wiring in your vehicle.
Before starting the installation Before beginning the installation, disconnect the battery to avoid short circuits and airbag deployment. Double-checking the CAN L and CAN H wires is essential, as incorrect identification can cause a misalignment of the system. It is also a good idea to mark the wires using small bits of tape or label them with labels. Use a multimeter to confirm that the power source is supplying the same 12V.
Advanced thieves employ a variety of methods to evade Ghost Immobilisers, such as blocking or spoofing. These techniques are based on amplifying signals from the key fob to your vehicle's electronic controller unit. With advanced anti-jamming techniques and vigilant monitoring, your vehicle can be protected from these sophisticated attacks.
Enhanced security
Ghost immobilisers are an additional layer of protection to your car against theft. It works with an PIN code security system that can be operated by using buttons that are already on the steering wheel or on your dashboard, making it difficult for thieves to gain access the device and take your vehicle. The device is also designed to be hidden within the vehicle, and is devoid of any other lights or signals that could warn thieves of its presence. It communicates directly with the ECU of your car through the data bus. This means it isn't vulnerable to relay attacks or hacking.
It is a great investment for those with high-end cars, which are at higher chance of being stolen due to their value and popularity. The enhanced features of the system protect your car from key copying and ECU swapping. Some ghost immobilisers may be connected to an app, so that you can easily arm and disarm them. They may also have a service/valet setting that lets you temporarily disable the immobiliser during repairs or maintenance.
Another great feature of a ghost immobiliser is that it does not require any wire cutting. This is a nice feature, especially if are driving a car that does not have any built-in immobiliser technology. Certain systems might also be capable of integrating with a GPS tracking device, which can provide additional security for your vehicle. A GPS tracker may also aid in reducing your insurance premiums. If you choose to buy an immobiliser that is ghost, make sure it is TASSA-certified and that an expert installer installs the device for you.
Compatibility with all major brands and models
The Ghost Immobiliser has been designed to work with all major brands and models of vehicles that will protect your vehicle from theft. It creates a unique pin code by pressing buttons on your steering wheel, console or door panels. You must enter this code before you are able to drive. The system is tamper proof unbreakable and comes with three-year guarantee. It is also fully endorsed by insurance providers. This means you can reduce your costs.
In contrast to standard immobilisers that use the key fob of your car to control the car's ignition however, the Ghost system works by connecting directly with the engine controller unit via the CAN data bus. This means it is tamper proof, virtually impossible to disable or remove and is not hacked by organised car thief gangs. Additionally, Ghost is tamper-proof, meaning that it is virtually impossible to disable or remove. Ghost system can be linked with an secure iPhone application that permits remote monitoring and management.
You can create an PIN that is simple to remember, but mathematically impossible to guess for thieves. The PIN can be customized and changed at any point, so you can keep your car safe even when you park it on the street or in a public parking lot. You can also select a valet or service mode when you need someone else to drive your vehicle temporarily, such as when it's in the garage. This feature will also help to prevent your car from being taken by a dishonest mechanic. To ensure your peace of mind, you can opt for a Ghost call alert to notify you if your car is moving or if it's moved.
Convenience
The ghost immobiliser shields your vehicle from theft methods like key cloning or relay attacks. It connects to the vehicle's CAN data network and preventing communication with the engine ECU. This makes it difficult for thieves to duplicate or hack your vehicle, which makes the installation of this system a good idea for all drivers.
Once installed, you'll have to enter a PIN up to 20 digits in length using the buttons on the dashboard and the steering wheel to begin the car. The system is completely hidden and undetectable to thieves, since it doesn't emit any radio frequency signals. It can be set up using an PIN code that is user-changeable, adding to its security. The system is designed to stop cutting of circuits, making it virtually impossible to tamper.
If you do have a problem remembering your PIN, there are systems that let you communicate with the immobiliser using an app on your phone to disarm it immediately. Some systems even have a service/valet setting that allows you temporarily to start your car, for example when you drop it off at a garage or valet park.
The Ghost Immobiliser is also undetectable by thieves, as it transmits no radio signals. This is a major benefit over other security systems that are sold aftermarket. It is also simple to use and doesn't require any complicated wiring. It can be used combination with dash cams to provide added safety. Dash cam Thinkware F70 features clear and sharp 1080p HD footage, Format Free Technology, and parking mode. The system is able to be hardwired to guarantee maximum performance and longevity.
Installation
If you're looking to safeguard your vehicle from theft it is important to select the correct immobiliser ghost. This device can stop car thefts by preventing the communication between key fobs and the engine controller unit. This device stops thieves from stealing and cloning the signal used to start your vehicle. It also detects the moment it has been altered with and notify the owner of the vehicle.
The device is simple to install and works with the existing systems in your vehicle. It does not require any modifications to wiring in your vehicle and can be installed in a hidden location, like under the dashboard. Follow the directions in the manual to make sure the device is installed correctly. After installation, it's important to test the system. This will ensure that the immobiliser ghost works as intended.
You can purchase an Autowatch Ghost 2 Immobiliser from a certified installer and have it installed on your vehicle. The installer will connect Ghost to your vehicle's CAN Bus system, making it more difficult for thieves to take over the system or bypass it. The installation process generally takes between 2 and 3 hours.
During ghost vehicle immobiliser is recommended that you consult the wiring diagram for the vehicle model you are using. This will help you identify the CAN High and CAN Low wires needed to connect the Ghost to your vehicle's engine. Check all connections to ensure that they are safe and well-insulated.
Once the installation is completed and you are able to use the Ghost Immobiliser in normal operation. It will disable your vehicle's ignition if it is not started using the correct PIN code, which you can set yourself. The ghost of the immobiliser can be set to Service/Valet Mode for when you require your vehicle to be to be serviced or valet-parked.